Ducato clock settings and truma combi

You should find the answer to your clock setting issue in your Fiat manual. It’s quite complicated and I can’t describe it to you. Alternatively look on YouTube - a good source of info.

The only other thing I can say is that we, too, smell our water heating up due to the pipe insulation getting hot.

Your supplying dealer should be able to answer all your points.

 

The user and all related content has been Deleted User

On second thoughts, our is a Pug probably using slightly different electronics so the Fiat may be less involved.

We tend to keep our Combi on ECO then change it to high or boost if more hotter water is req

Ps ours also can smell hot when on high settings

My Avic F980DAB changed the time automatically at the weekend. I can only assume it synced with my phone clock which is Bluetoothed when I use it.

I'll check my AVIC in the morning, it is also sync'd to my phone so may have done it automatically, too...I drove the van today but didn't notice the time on the AVIC. shpuld it need changing, there is a settings Icon (COG wheels) which opens the settings menu  clock should be in there.

however, I did notice the Fiat clock was wrong and changed it while waiting at a set of traffic lights.....it's pretty easy....less than 10 secs...

but your post suggests you perhaps have slightly different 'menu' options.

on ours.....press mode, press down arrow to scroll through options, 3rd/4th is Time.

press Mode again, clock Hour digit flashes, press Up/Down to change.

press Mode again to keep changes.

done.

...just to add, our AVIC did change its time correctly by itself...it's also linked to my iPhone so picks time changes up from there.

Truma combi all smell when on mains, common issue, don't worry. No idea on the pressure noise.

Our AVIC changed the time automatically last weekend but I can’t do anything with the mode/setting switch, press mode and scroll....all l get scrolling through is beeps, limiter and the service schedule, the clock on the dash is wrong and I can’t seem to change it as it doesn’t come up as an option to adjust scrolling through.