Overheat red fail
14 replies
Graydjames replied on 28/12/2019 13:54
Posted on 28/12/2019 13:54
"Thanks to everyone who didn't say just read manual as any fool can do that."
Agree totally, conecrusher, with your sentiments; and not just that, but I DID try reading the manual and it was no help whatsoever. Suggested an extremely long winded procedure a lot of which I could not follow and much of which was impractical for an ordinary mortal like me and all of which was entirely unnecessary (see above post).
conecrusher replied on 27/01/2020 12:38
Posted on 27/01/2020 12:38
Further to my previous reply, when I actually took the panel off the top of the boiler as shown in the video, I found the wires were completely different. Found all the wires were electronic type connectors with a positive locking system. The wire for the rear pump was loose and fell out when I moved the main feed wires. Bit fiddly to refit, but all the connectors and wires are marked, so can't get them in wrong place.Have had no problems since and saved me taking van to dealer 20 miles away.
starbright