Waste hog wheels

If anyone out there has a Grey water Waste Hog with broken wheels and ever tried to source one (last time I looked £18+ per wheel) here is a very good cheaper fix.

https://www.screwfix.com/p/select-rubber-wheel-250mm-diameter/2234p

I had to cut off 5/6mm from the hub then using my gas weed killer from Aldi heated up the axle (not red hot) and push it carefully through the centre of the hub as it is about 0.5mm too narrow. It took a couple of goes but in total to complete both wheels about 30mins for the whole process.

That came in for both wheels at £15:98 and not £36+...Bargain!