Dash cams

pterodactyl replied on 05/11/2019 14:46

Posted on 05/11/2019 14:46

I am considering fitting forward and rear view dash cameras to my Hyundai Santa Fe. In order to cut down on the wiring and cost I am thinking of buying two forward view cameras rather than an integrated pair of cameras. Each camera would have its own power source and SD card. Will a dash cam designed as a forward looking camera work if mounted as a rear cam? 

ocsid replied on 05/11/2019 16:13

Posted on 05/11/2019 16:13

I tried the same, but in my case a Disco 4 the glass being so vertical screwed up the mounting, its adjustment range was for far greater lean-back angled front screens. A budget Nextbase model.

Plus, the heater tracks caused the "sucker" to fail to seal properly and so work for any real duration..

I thought of bonding my own DIY bracket on though decided I might screw up the heater element track, like possibly by locally overheating it.

Not all wasted, I have mounted it on my cycle, again via a DIY bracket.

pterodactyl replied on 05/11/2019 16:53

Posted on 05/11/2019 16:53

Thanks MollysM. Luckily I have a power point at the rear so extra cables will be at a minimum.  Thanks also ocsid. I will look at the space left free of heater tracks. Good idea about the bike mount...I had not thought of that.

MollysMummy replied on 05/11/2019 20:22

Posted on 05/11/2019 16:53 by pterodactyl

Thanks MollysM. Luckily I have a power point at the rear so extra cables will be at a minimum.  Thanks also ocsid. I will look at the space left free of heater tracks. Good idea about the bike mount...I had not thought of that.

Posted on 05/11/2019 20:22

I meant actually getting the power cable from the body of the car to the tail gate itself. My front dash cam is glued to the screen using the 3M sticky pad that came with the camera so Ocsid's problem re the sucker doesn't apply.